Toshiba CT manual Speed Dial Memos, To program Speed Dial names and numbers

LCD Operation

Memos

Your LCD confirms the message was sent.

➤To return to a busy station message after receiving a busy station message

MSG SEND

1.Press 0RGH + ￿.

2.Enter the message number.

3.Press 3DJH.

OVR TO ST210

MSG NO?

Station message (10~19) and system message (60~99). The LCD displays the message. (This assumes the message is already stored in memory.)

Your LCD confirms the message was
sent.	MSG SEND

Memos

Speed Dial Memos

You can store names (12 characters max.) for each of 40 station speed dial numbers. The memo pad of names can be scrolled to select the appropriate party. The station must be enabled via system programming for LCD message memory.

➤To program Speed Dial names and numbers

1.Press 5HGLDO, then

6SHHG￿'LDO.

2.Dial a station speed dial code.

3.Press 0RGH.

See Table 15 on page 111 for speed dial codes.

If a name was previously stored on this code, it appears on the top line.

# * 10 SPEED DIAL

*10 NAME

SPEED DIAL

96 Strata DK Digital Telephone 5/99