Toshiba CT manual DISA Calls - External, Direct Inward System Access DISA

Features

Direct Inward System Access (DISA)

2.When you hear dial tone, dial a [DN].

3.If you receive busy tone or want to dial another number while the station is still

ringing, press ￿. Repeat Step 2.

You hear ring tone. When the station answers, you are connected.

If the call is not answered after 6 rings or 24 seconds, (whichever comes first) you hear busy tone.

To call another station after completing a DISA station call, the internal party must transfer you. Station and System Page cannot be accessed on DISA calls.

DISA Calls - External

1.From outside the system, call the DISA CO line telephone number.

2.When you hear dial tone, dial a CO line or CO line access code

...or dial a CO line or CO line access code and then a DISA security code. See Table 12 on page 109 access codes.

3.When you hear dial tone, dial a telephone number.

You hear a ringback tone signal, then an internal dial tone for 10 seconds.

If you do not dial within 10 seconds, the system automatically rings the DISA CO line as a normal incoming call. Then, if the call is not answered within 15 seconds after the ringing starts, it disconnects.

You hear dial tone. If you do not hear dial tone, you must also dial a DISA security code.

You hear dial tone.

Note See the System Administrator for the DISA security code number. If the correct code is not entered, the call disconnects.

If set in system programming, both parties hear a warning tone approximately 4, 10, or 20 minutes after the call was made. Press ￿ to reset the timer each time the tone sounds (for an additional 4, 10, or 20 minutes). If you do not press ￿, the call disconnects approximately one minute after the tone.

Strata DK Digital Telephone 5/99 39