Toshiba CT manual LED Indicators

The Grand Tour

LED Indicators

LED Indicators

Each line and feature button has a LED next to it which indicates the status of the line or feature associated with the button.

Line LEDs light red or green and flash at varying rates to indicate call status (see Table 3).

Table 3	LED Indicators
	Use	Your Station (Green)	Other Station (Red)
		Interval Rates
	Line or [DN] In-Use	2 seconds on, 1/8 second	steady
	(access outside line)	off— 1/8 second ON/OFF
	Incoming Call	1 second on at 10 pulses/	one second ON/OFF
	(while ringing)	second—1 second OFF
	Hold (outside line)	4 pulses/second for 1/8	1/2 second ON/OFF
	Note If using 3RROHG￿/LQH￿*US, the	second ON/OFF
	hold indication is only at the
	station that places the call on
	hold.
	Hold – Consultation	10 pulses/second	steady
	(during consultation/transfer to another
	station)
	Hold – Exclusive (outside line)	10 pulses/second	steady
	Hold – Recall	1 second at 2 pulses/second,	flashes
	(when held call recalls your idle station)	1 second at 10 pulses/second
	Hold – Exclusive Recall	1 second at 2 pulses/second,	steady
		1 second at 10 pulses/second
	Internal Call	Your [PDN] flashes 10 pulses/	[SDN] red flashing or
	(while station ringing)	second—1 second off	green ringing
	Busy Station Transfer	4 pulses/second, 1/8 second	3/4 second on, 1/8
	(outside call transferred to your busy	ON/OFF	second OFF
	station from a designated station or AA)
	After disconnecting first call...	10 pulses/second	2 pulses/second
	Alert Signal	.5 seconds	4 seconds
	Conference	10 pulses/second	steady

Strata DK Digital Telephone 5/99 9