Toshiba CT manual Message Retrieval, To assign a voice mail message mailbox number

Features

Voice Mail Integration

➤To assign a voice mail message mailbox number

Note This procedure is required for the initial storage of VM ID code to the Toshiba Voice Mail system. Once programmed, these digits remain in memory until changed. To change the code, repeat this procedure.

1.Press [DN] + ￿￿￿￿.

2.Enter the voice mail ID code and the voice mailbox [DN], plus any required pauses (up to 16 characters).

3.Press 5HGLDO.

➤To cancel the mailbox number

You hear confirmation tone.

Example: for Toshiba voice mail systems, enter ￿￿ + the mailbox number.

203= mailbox number of the [DN] you pressed in Step 1.

You hear a confirmation tone. The LCD confirms the data storage.

656 ID CODE SET

91203

DATA PROGRAMED

➤Press [DN] + ￿￿￿￿ + 5HGLDO.

Message Retrieval

You can program a flashing 06* or [PhDN/MW] to automatically retrieve your voice mail messages when it is pressed. Storing the message retrieval sequence in Steps 1~4 below is required only once. It remains in memory unless cancelled or changed.

➤To assign the message retrieval sequence

1. Press [DN] + ￿￿￿￿.

You hear a confirmation tone.

657 ID CODE SET

Strata DK Digital Telephone 5/99 73