Toshiba CT manual Call Transfer with Camp-on, Page/Internal Call Pickup, To transfer a call

2.Enter ￿￿, then the

access code

(￿￿￿￿~￿￿￿￿) of the group to which the station belongs.

Features

Call Transfer with Camp-on

You are connected to the call. If the called station belongs to more than one group, any of the Group Pickup codes associated with those groups pickup the call.

Page/Internal Call Pickup

This feature picks up Internal (station to station), Group Page, and All Call Page calls. If these types of calls occur at the same time, the pickup priority is station-to-station and then Page calls in the order of occurrence. In some systems this feature can be applied to pickup All Call Page exclusively.

➤To pickup a page or internal call

1.	Press [DN].	You hear dial tone.
2.	Enter ￿￿￿￿￿.	You are connected to the caller who originated the internal or
		page call. The page circuit is released.

Call Transfer with Camp-on

You can transfer calls to idle or busy [DNs], Hunt Group Numbers, ACD Group [DNs], etc. You cannot transfer (or camp-on) to a station’s [PDN] or [PhDn] if the station is in the DND mode, unless the station’s [PDN] or [PhDN] appears on other stations.

➤To transfer a call

1.While on a call, press

&QI￿7UQ.

2.Dial the [DN] where the call will be transferred.

3.If the station is idle, announce the call and hang up

The Line or [DN] LED flashes green (conference rate). You hear internal dial tone.

The CO line rings the called station. If you hear a single tone, you can then announce the call over the called telephone’s speaker. (If you hear ringing tone, the call was made with Tone Signaling.)

Strata DK Digital Telephone 5/99 35