4.10 Display assembly 4 Replacement Procedures
15. While lifting up the cover assembly slightly, peel off the glass tape 2 on the system
board.
16. Turn up the insulator 2 on the system board and disconnect the wireless LAN
antenna cables from the wireless LAN card.
CAUTION: When turning up the insulator 2, be careful not to break the SD card slot
cover.
17. Pull out the wireless LAN antenna cables from the slot of cover assembly.
18. Pull out the LAN harness from the slot of cover assembly.
19. Part the cover assembly from the base assembly.
Cover assembly
LAN harness
Insulator 2
Glass tape 2
Wireless LAN
antenna cables
Lever portion of CF card slot cover
Base assembly
Figure 4-21 Removing the cover assembly
4-32 PORTEGE M300 Maintenance Manual (960-504)