4.28 LCD harness 4 Replacement Procedures
Installing the LCD harness
To install the LCD harness, follow the steps below and refer to figure 4-44.
1. Arrange the LCD harness along the guide of LCD cover.
NOTE: Arrange the LCD harness to set the marking portion of LCD harness in the
position of gateway of LCD cover.
Be careful not to
catch the harness
Set the marking portion in the position
of the gateway of LCD cover
2. Install the LCD harness holder while locking the hook portion and secure it with the
following screw.
M2.0x3.0S S-THIN FLAT BIND screw ×1
CAUTION: When installing the LCD harness holder, be careful not to catch the LCD
harness in LCD harness holder.
4-64 PORTEGE M300 Maintenance Manual (960-504)