3.32 SETUP 3 Tests and Diagnostics
3-104 PORTEGE M300 Maintenance Manual (960-504)
Set the parameters for the Auto Power On (automatic power on) function in
the “OPTIONS” window. To set the time, use Space or BackSpace. Press
↓ to move the cursor to the right and ↑ to move the cursor to the left when
you set the date and time.
For the Alarm Time, set the time to turn on the power automatically. The
“second” cannot be set. When it is set to “Disabled”, the time to turn on
automatically is not set.
For the Alarm Date Option, set the date to turn on the power automatically.
When it is set to “Disabled”, the time to turn on automatically is not set.
The Ring Indicator is displayed only when the computer is in Resume mode
and this function cannot be used for a PC card-type modem. When any
modem is not installed, it is not displayed.
The Wake-up on LAN is a function to turn on the power automatically by the
call from the administrator. It can be set to “Enabled” only when “Built-in
LAN” is set to “Enabled”. To activate this function, use the AC adapter.
NOTE: 1. Do not remove the AC adaptor and battery pack at the same time when you
use this feature. If you do so, data saved by the resume function will be lost.
You must also reset this option.
2. If you have set a password and the computer boots by the Auto Power On
function and Standby is on, the computer will start with the instant security
function enabled. The password = message is not displayed; however, you
must enter the password to use the computer.
3. This option is enabled only once, the setting is reset, after booting up.
(f) Panel Power On/Off
This option is displayed only in the resume mode.
Enabled Enables the Panel Power On/Off.
Disabled Disables the Panel Power On/Off. (Default)
(g) Performance/Battery Life Setting
Use this option to choose a setting of Memory Bus Clock and Graphics Core
Clock from the followings.
Performance Initial setting. (Default)
BatteryLife Saving power by setting in lower clock and voltage.