Toshiba PORTEGE M300 - page 257

4 Replacement Procedures 4.10 Display assembly
3. Open the display and remove the following screw securing the GND cable and cover
assembly.
 M2.0×6.0B BIND screw ×1
4. Remove the following screws securing the cover assembly.
 M2.0×6.0B BIND screw ×2
5. Disconnect the LCD harness from the connector CN5600 on the system board.
6. Disconnect the inverter harness form the connector CN8812 on the system board.
7. Disconnect the LAN harness from the connector CN4100 on the system board.
8. Disconnect the speaker cable from the connector CN6180 on the system board.
9. Disconnect the touch pad cable from the connector CN3240 on the system board.
LAN harness
(Connected to CN4100)
Inverter harness
(Connected to CN8812)
M2.0x6.0B BIND
(securing with
GND cable
)
LCD harness
(Connected to CN4100)
M2.0x6.0B BIND
Speaker cable
(Connected to CN6180)
M2.0x6.0B BIND
Touch pad cable
(Connected to CN3240)
Figure 4-18 Removing the screws and cables
PORTEGE M300 Maintenance Manual (960-504) 4-29