3 Tests and Diagnostics 3.32 SETUP
When you select one of the above options, except for Not Used, a subwindow
similar to the one below appears to let you set the DMA. The options for this
setting are Channel 1and Channel 3 (Default).
DMA = Channel 3 (Default)
OPTIONS
For most printers, the port should be set to ECP. With some other parallel
devices, the setting should be Std. Bi-Direct.
11. Drives I/O
This option displays the address and interrupt level for hard disk drive and optical
disk drive. It is for information only and cannot be changed.
Built-in HDD This cannot be changed.
CD-ROM This cannot be changed. This is not displayed when a drive
is not built-in.
12. PCI Bus
This option displays the interrupt level for the Card Bus in the computer. It is for
information only and cannot be changed.
PCI BUS = IRQ10, IRQ11
13. Peripheral
Use this option to select the peripheral's mode.
(a) Internal Pointing Device
This option enables or disables the touch pad
Enabled Enables the touch pad. (Default)
Disabled Disables the touch pad.
(b) Ext Keyboard "Fn"
This option enables or disables Fn key function on the external keyboard.
Enabled Enables the feature.
Disabled Disables the feature. (Default)
When “Enabled” is selected, the following sub-window appears.
PORTEGE M300 Maintenance Manual (960-504) 3-107