Toshiba PORTEGE M300 4.19 Cooling fin

4 Replacement Procedures 4.19 Cooling fin
4.19 Cooling fin
Removing the cooling fin
To remove the cooling fin, follow the steps below and refer to figures 4-31.
1. Remove the following screws and cooling fin from the system board.
 M2.0x3.0S S-THIN FLAT BIND screw ×2
NOTE: When removing the cooling fin, be sure to remove the screws in the reverse
order of the number marked on the cooling fin (2→1).
M2.0x3.0S
S-THIN FLAT BIND
Cooling fin
Figure 4-31 Removing the cooling fin
PORTEGE M300 Maintenance Manual (960-504) 4-45