Toshiba PORTEGE M300 - page 274

4.19 Cooling fin 4 Replacement Procedures
Installing the cooling fin
To install the cooling fin, follow the steps below and refer to figures 4-31 and 4-32.
1. If there is already silicon grease on the CPU and cooling fin, clean them with a cloth.
2. Using a special applicator, apply silicon grease so that the CPU chip on the CPU is
completely covered.
Silicon grease
CPU
Figure 4-32 Applying silicon grease
3. Install the cooling fin and secure it with the following screws.
 M2.0x3.0S S-THIN FLAT BIND screw ×2
NOTE: When installing the cooling fin, be sure to install the screws in the order of the
number marked on the cooling fin (1→2).
4-46 PORTEGE M300 Maintenance Manual (960-504)