Toshiba PORTEGE M300 4.9 Optical drive

4 Replacement Procedures 4.9 Optical drive
4.9 Optical drive
Removing an optical drive
To remove an optical drive, follow the steps below and refer to figures 4-15 and 4-16.
1. Turn over the computer and remove the following screws securing an optical drive
assembly.
 M2.5×10.0B FLAT BIND screw ×1
 M2.0×4.0B BIND screw ×1
2. Push out an optical drive assembly by pressing it from the slot and remove it.
Optical drive M2.5x4.0B BIND
M2.5x10.0B
FLAT BIND
Slot
Figure 4-15 Removing an optical drive assembly
PORTEGE M300 Maintenance Manual (960-504) 4-25