4.9 Optical drive 4 Replacement Procedures
3. Remove the following screws securing the rear bracket and remove it from an
optical drive assembly.
Unique screw Stepping screw ×2
4. Remove the following screw securing the side bracket and remove it from an optical
drive assembly.
M2.0×3.0S S-THIN FLAT BIND screw ×1
Rear bracket
M2.0x3.0S
S-THIN FLAT BIND
Side bracket Stepping screw
Fitting this dent
to the side bracket
Figure 4-16 Removing the brackets
4-26 PORTEGE M300 Maintenance Manual (960-504)