Toshiba PORTEGE M300 - page 265

4 Replacement Procedures 4.12 Touch Pad
Pad cover
M2.0x3.0S
S-THIN FLAT BIND
Touch pad
Figure 4-24 Removing the touch pad
Installing the Touch Pad
To install the touch pad, follow the steps below and refer to figures 4-23 and 4-24.
1. Arranging the touch pad cable, stick the touch pad in place and secure it with
following screws.
 M2.0x3.0S S-THIN FLAT BIND screw ×2
2. Install the pad cover while locking latches.
3. Stick the cover sheet along the guide of cover assembly.
CAUTION: Do not reuse the cover sheet. Be sure to use a new cover sheet after peeling
off the cover sheet from the cover assembly.
PORTEGE M300 Maintenance Manual (960-504) 4-37