4 Replacement Procedures 4.10 Display assembly
12. Remove the following screws securing the hinge caps and remove the hinge caps.
M2.5x8.0B FLAT BIND screw ×2
13. Remove the following screws securing the hinges and remove the hinges.
M2.5x8.0B FLAT BIND screw ×2
14. Part the display assembly from the base assembly and put it apart with antenna
cables connected between both assemblies.
Display assembly
Hinge cap
M2.5x8.0B
FLAT BIND
M2.5x8.0B FLAT BIND
[with Locktight]
M2.5x8.0B FLAT BIND
[with Locktight]
Hinge M2.5x8.0B FLAT BIND
Base assembly
Hinge cap
Figure 4-20 Removing the display assembly
PORTEGE M300 Maintenance Manual (960-504) 4-31