4.27 LCD unit/ FL inverter 4 Replacement Procedures
8. Removing the following screw, remove the GND cable and washer from the LCD
unit.
M1.4x2.0S S-THIN FLAT BIND screw ×1
CAUTION: GND cable is removed from LCD unit only when LCD unit must be replaced.
LCD unit
Caulking side
Washer
GND cable
M1.4x2.0S S-THIN FLAT BIND
Figure 4-43 Removing the GND cable
4-60 PORTEGE M300 Maintenance Manual (960-504)