Toshiba PORTEGE M300 4.8 Bluetooth

4.8 Bluetooth 4 Replacement Procedures
4.8 Bluetooth
Removing a Bluetooth
To remove a bluetooth, follow the steps below and refer to figures 4-14.
1. Remove the following screw securing a bluetooth module.
 M2.0×3.0S S-THIN FLAT BIND screw ×1
2. Disconnect the blutooth flat cable from both a bluetooth module and connector
CN4400 on the system board.
3. Disconnect the bluetooth antenna cable from a bluetooth module.
Bluetooth flat cable
Bluetooth antenna cable
CN4400
Bluetooth module M2.0x3.0S S-THIN FLAT BIND
Figure 4-14 Removing a bluetooth module
Installing a Bluetooth
To install a bluetooth, follow the steps below and refer to figures 4-14.
1. Connect the bluetooth antenna cable to the connector on a bluetooth module
2. Connect the bluetooth flat cable to both a bluetooth module and the connector
CN4400 on the system board.
3. Install a bluetooth module along the guide and secure it with the following screw.
 M2.0×3.0S S-THIN FLAT BIND screw ×1
4-24 PORTEGE M300 Maintenance Manual (960-504)