4 Replacement Procedures 4.26 LCD mask
PORTEGE M300 Maintenance Manual (960-504) 4-57
Installing the LCD mask
To install the LCD mask, follow the steps below and refer to figures 4-41.
1. Install the LCD mask while fitting the latches.
NOTE: Be careful not to catch the LCD harness, wireless LAN antenna cables and
bluetooth antenna cable between LCD mask and display cover.
When installing the LCD mask, make sure there is no gap between the LCD mask
and display cover.
2. Secure the LCD mask with the following screws.
M2.0x4.0S S-THIN FLAT BIND screw ×4
3. Stick three mask rubbers to the LCD mask.
4. Stick four mask seals to the LCD mask.