Toshiba PORTEGE M300 - page 243

4 Replacement Procedures 4.4 HDD
5. Remove the HDD cushion rubbers from the both sides of HDD assembly.
6. Remove the following screws and slide out the HDD from the HDD bracket.
 M3.0×4.0S FLAT HEAD screw ×4
NOTE: When removing the HDD bracket, be sure to remove the screws in the reverse
order of the number marked on the holder (4→3→2→1).
HDD cushion rubber
HDD bracket
M3.0x4.0S FLAT BIND
HDD
M3.0x4.0S FLAT BIND
HDD cushion rubber
Figure 4-8 Removing the HDD
PORTEGE M300 Maintenance Manual (960-504) 4-15