4 Replacement Procedures

4.19Power Membrane

Removing the Power Membrane

Remove the power membrane according to the following procedures and Figure 4.34.

1.Disconnect the power membrane from the motherboard.

2.Peel off and remove the power membrane, taking care not to damage or tear it.

Figure 4.34 Removing the power membrane

Installing the Power Membrane

Install the power membrane according to the following procedures.

1.Seat the power membrane in the correct place and adhere it to the lower logic assembly.

2.Connect the power membrane to the motherboard.

NOTE: Where possible reuse the power membrane. If the power membrane is faulty or is compromised during removal install a new power membrane.

Satellite A660/ProA660 Series Maintenance Manual

4-44

Page 219
Image 219
Toshiba PROA660 manual Removing the Power Membrane, Installing the Power Membrane