4 Replacement Procedures
Satellite A660/ProA660 Series Maintenance Manual 4-48
2. Remove the M2.5x5 screw securing the motherboard as shown in Figure 4.37.
3. Raise the motherboard from the right edge and slide it out, taking care not to damage the
connector ports.
Figure 4.37 Removing the discreet motherboard from the system
Installing the Motherboard
Install the motherboard according to the following procedures.
1. Seat the motherboard in the correct position.
2. Secure the motherboard with one M2.5x5 screw as shown in Figure 4.37.
3. Slot the DC in cable into the connector port slot and press the wires into the channels on
the logic lower assembly.
M2.5x5*1