Operation section
Push each button to select a desired operation.
•The details of the operation needs to be set up once, afterward, the air conditioner can be used by pushing 
button only.
2
4
3
5
1 7
UNIT
SET CL
6
8
9
10
1 Air volume select button
Selects the desired air volume mode.
2 Timer set button
TIMER SET button is used when the timer is set up.
3 Check button
The CHECK button is used for the check operation. During normal operation, do not use this button.
4 Fan button
FAN button is used when a fan which is sold on the market or etc. is connected.
•If “No function” is displayed on the remote controller when pushing the FAN button, a fan is not connected.
5 Filter reset button
Resets (Erases) “FILTER 
” display.
6 UNIT and AUTO flap button
UNIT (No function)
7 Operation lamp
Lamp is lit during the operation. Lamp is off when stopped.
Although it flashes when operating the protec- tion device or abnormal time.
8 
button
When the button is pushed, the operation starts, and it stops by pushing the button again.
When the operation has stopped, the operation lamp and all the displays disappear.
9 Operation select button
Selects desired operation mode.
10 Set up temperature button
Adjusts the room temperature.
Set the desired set temperature by pushing
or 
.
OPTION :
Remote controller sensor
Usually the TEMP. sensor of the indoor unit senses the temperature. The temperature on the surround- ing of the remote controller can also be sensed.
For details, contact the dealer from which you have purchased the air conditioner.
19
