DRY OPERATION
Start
1 START/STOP button
Push this button to start the air conditioner.
2 Mode select button (MODE)
Select DRY.
3 Temperature button
Set the desired temperature.
•The FAN speed display indicates AUTO
•The OPERATION lamp (green) on the switch panel of the remote controller lights, and operation starts after approximately 3 minutes.
2
3
MODE FA N
F A N CHECK C O O L 1 2 
H E AT AU TO
F I X
MODE
FILTER CHECK
T E M P.
ADDRESS UNIT STANDBY
FILTER
PREHEAT DEFROST
LOUVER CENTRAL MANUAL
ON/OFF
Stop
START/STOP button | 1 |
Push this button again to stop the air conditioner.
AUTOMATIC OPERATION (Auto Changeover)
When you set the air conditioner in A mode or switch over from AUTO operation because of some settings change, it will automatically select either cooling, heating, or fan only operation depending on the outdoor temperature.
Start
1 START/STOP button
Push this button to start the air conditioner.
2 Mode select button (MODE)
Select Auto.
2
MODE FA N
F A N CHECK C O O L 1 2 
H E AT AU TO
F I X
MODE
FILTER CHECK
T E M P.
ADDRESS UNIT STANDBY
FILTER
PREHEAT DEFROST
LOUVER CENTRAL MANUAL
3 Temperature button
3
ON/OFF
Set the desired temperature.
• In case of cooling, it starts the operation after approx. 1 minute. | 1 |
|
•In case of heating, the operation mode is selected in accordance with the room temperature and operation starts after approximately 3 to 5 minutes.
•When you select the Auto mode, it is unnecessary to set the fan speed.
The FAN speed display will show AUTO and the fan speed will be automatically controlled.
•If the Auto mode is uncomfortable, you can select the desired conditions manually.
Stop
START/STOP button
Push this button again to stop the air conditioner.
85
