•When the air conditioner stops, the flap (adjustment plate of up/down wind direction) directs downward automatically.
•When the heating operation is in READY states, the flap (adjustment plate of up/down wind direction) directs upward. The swinging starts after HEAT READY status cleared, SWING is displayed on the remote controller even if the heating operation is in READY status.
The wind direction changes for every push of the button.
Direct the flap (adjustment plate of up/down wind direction) downward. If directing at upward, hot air may not come to the foot.
Direct the flap (adjustment plate of up/down wind direction) upward. If directing it downward, the dew may from on the surface of the air discharge port and may drop down.
Initial setup
Initial setup
plate of up/down wind direction) direction to the lowest position, and then push
SWING is displayed and the up/down wind direction is automatically selected.
•The flap stops at a position when you push.
After then, if pushing , the wind direction descends from the highest position.
•In COOL/DRY operation, the flap does not stop as it directs downward. If stopping the flap as it directs downward during swing operation, it stops after moving to the 3rd position from the highest position.
UNIT
SET CL
In FAN operation | In all modes |
Series of operation
Initial setup
Fan/HeatCool/Dry
operationoperation
22