Toshiba satellite p100 manual Installing the cover assembly

Replacement Procedures

Installing the cover assembly

The following describes the procedure for installing the cover assembly (See Figure 4-19 to 4-21).

1. Install the cover assembly to the base assembly.

NOTE: Be careful not to catch the cables between cover assembly and base assembly.

2.Connect the touch pad flat cable to the connector on the system board.

3.Secure the cover assembly with the following screws from the back and bottom of computer.

•	M2.5⋅6.0B	FLAT BIND screw Front	x3
•	M2.5⋅6.0B	FLAT BIND screw Back	x18
•	M2.5x4.0 B	FLAT BIND screw	x1

4. Free the cable from cable-drain when through the antenna cable to PCB hole.

Satellite P100 Maintenance Manual (960-Q02) 4-37