Installing a HDD

Replacement Procedures

The following describes the procedure for installing a HDD (See Figure 4-3 to 4-4).

1. Install a HDD to the HDD holder and secure it with the following screws.

• M3.0⋅3.5F FLAT BIND screw

NOTE: Although they are 3mm head screws, screw torque must be set in 2.5kg-cm for four screws securing the HDD holder.

2.Insert the HDD assembly into the HDD slot and connect it carefully to the CN19 on the system board.

3.Secure the HDD assembly with the following screw.

• M2.5⋅4.0B

FLAT BIND screw

4-15

Toshiba satellite p100 manual Installing a HDD