Toshiba satellite p100 manual Go To Test

Test Program for Field.

TOSHIBA Satellite(Pro) P100 Diagnostics								: :Select item
Version V1.00 (C) Copyright QUANTA Corp. 2005-							ESC	:Escape
[ DIAGNOSTICS MENU ]						[ SYSTEM TEST ]
	[ TEST PARAMETER ]
01. DIAGNOSTIC TEST		0101. FAN ON/OFF
	01. Go To Test
02. RUNNING TEST		02. Battery Test
	02. Test Loop		:	YES
03. DISK UTILITIES		03. CPU Temperature
	[					TEST MENU ]
	03. Error DIAGNOSTICStop :
04. LOG UTILITIES		99. Exit to DIAGNOSTIC TEST MENU
05. SYSTEM CONFIGURATION				. REAL TIME CLOCK TEST
01. SYSTEM TEST
06	MEMORY TEST		10.		NPX TEST
02.
99. EXIT			11.		HIGH RESOLUTION DISPLAY TEST
03.	KEYBOARD TEST
04.	DISPLAY TEST		12.		MULTIMEDIA TEST
05.	FLOPPY DISK TEST		13.		USB TEST
06.	HARD DISK TEST		14.		MEMORY2 TEST
07.	REAL TIME CLOCK TEST		88. FDD&HDD ERROR RETRY COUNT SET
			99.		EXIT TO DIAGNOSTICS MENU

Use the arrow keys to highlight the desired option and press Enter.

Go To Test

Move the highlight bar to Go To Test and press Enter to start executing the test.

Test Loop

Select NO to return the screen to the subtest menu after the test is complete. Select YES to set the test to run continuously until it is halted by the user.

Error Stop

Select NO to keep the test running even if an error is found.

Select YES to stop the test program when an error is found and display the HALT OPERATION screen as shown below:

[[ HALT OPERATION ]]

1:Test end

2:Continue

3:Retry

These three selections have the following functions:

1:Terminates the test program and exits to the subtest menu.

2:Continues the test from the error.

3:Restarts the test from the beginning.

Use the arrow keys to move the cursor to the desired option and press Enter. Table 3-1 in Section 3.3 lists the function of each test on the subtest menu. Table 3-2 in Section 3.15 lists the error codes and error status for each error.

Satellite P100 and Satellite Pro P100 Tests and Diagnostics Manual 7