Toshiba satellite p100 Appendix G BIOS Rewrite Procedures

Satellite P100 Maintenance Manual(960-Q02) G-1
Appendix G
Appendix G BIOS Rewrite Procedures
This Appendix explains how to rewrite the system BIOS program when you update the
system BIOS.
Tools
To rewrite the BIOS, you need the following tool:
 BIOS/EC/KBC rewriting disk
 USB doggle
Rewriting the BIOS
1. Set the system to boot mode.
2. Turn off the power to the computer.
3. Remove the external cables and cards.
4. Connect an external FDD and insert the BIOS rewriting disk into the external FDD.
5. Connect the USB doggle special for BIOS rewrite
6. Turn on the power
7. The BIOS rewriting starts.
8. When the process is completed, it beeps and the system automatically reboots.
NOTE: 1. Connect the AC adaptor to the computer when you rewrite the BIOS.
2. Do not turn off the power while you are rewriting the BIOS.
If the rewrite fails, it might be impossible to start up the computer.
3. If you fail to rewrite BIOS, then when you next turn on the power, a
message may be displayed that the contents of the BIOS have been erased
or system can not boot . In this case, insert the BIOS rewriting disk, and the
BIOS will be rewritten.