Replacement Procedures
4.11 Bluetooth
The following describes for installing the display assembly (See Figure
Removing the Bluetooth
1.Pull out the Bluetooth cable connect from Bluetooth board
2.Loose the below screw and pull out the
z M2.3x3.0 | x2 |
Bluetooth
Antenna
M2.0*3.0
Figure 4-18 Removing the Bluetooth
Installing the Bluetooth |
| |
1. Fix the below screw |
| |
z | M2.3x3.0 | x2 |
2.Connect Bluetooth cable with MB and press Bluetooth antenna tight with Bluetooth connect
NOTE: Be sure to apply the locktight to the screws instructed in the figure above.
Satellite P100 Maintenance Manual |
