Replacement Procedures

4-42 Satellite P100 Maintenance Manual (960-Q02)
4.16 USB Board
The following describes for removing the cover assembly (See Figure 4-25).
Removing USB board
1. Remove the USB cable from CN4 and USBCN1
2. Loose below screw from USB board
z M2.5x4.0 FLAT BIND screw x1

Figure 4-25 Removing the USB board

Installing the USB Board
1. Put USB board in correct location and fix below screw
z M2.5x4.0 FLAT BIND screw x1
2. Connect the USB cable between CN4 and USBCN1