5GB
TOSHIBATF 631
Preparation
Preparation
Remove transportfittings:Prepare and insert theprinter unit
In order to prevent any transport damage,
the high-quality printer unit of your new
fax machine is supplied with the additional
protection of special packaging. Please
also follow the enclosed instructions.
The printer unit consists of two separate
components, namely the drum unit and
the developer assembly. Remove these
two parts from their packaging and follow
the following instructions.
1. Pull the release button to open the fax
machine.
2. Hold the ends of the developer assembly,
and shake the assembly several times from
side to side. This will loosen the toner.
• Avoid touching the metal roller.
3. Hold the developer assembly securely in one
hand, and use your other hand to peel the
protective film off from the toner cartridge.
• Avoid touching the protective film, as there
may be toner residues on the film.
4. Take the drum unit and insert it into the
developer assembly as detailed in the
drawing.
• Any damage to the printer drum will impair
the image quality. You must therefore never
touch the green drum surface or expose the
drum to direct sunlight for more than three
minutes.
5. Use the green handles to hold the printer
unit, and place the unit in the fax machine
as detailed in the drawing.
6. Press lightly on the green rectangles on the
drum unit so that the unit audibly clicks into
position.
The printer unit must be removed
before the machine is transported or
moved.
Before you start to use your fax machine,
please remove all transport fittings.