Toshiba TLP510E Video System Control Process, Panel System Control Process, Type name Process

5-10. Video System Control Process

In the video system control process, control signals are supplied to various video system process ICs shown in the table below. Table 5-10-1 shows the I2C control for each kind of video system.

5-11. Panel System Control Process

The panel system control process supplies various control signals to the panel system control ICs shown in the table below.

Table 5-11-1 shows the IC control for each kind of panel system.

	Table 5-10-1	I2C control for each kind of video system
Part No.	Type name		Process
QV001	CXA1855Q		I/O SW process
	(Custom: $90)
QV002	TC9090N		Color signal process (3D Y/C separation)
	(Custom: $B2)
QV005	TDA9141		Sync detection process (Custom: $8B)
	(Custom: $8A)		Signal kinds identification (NTSC/PAL/SECAM, etc.)
QV008	TDA4780		Video control (Density, hue)
	(Custom: $88)
QV007	TDA4672		Video control (Sharpness control)
	(Custom: $88)
QV045	CXA1315M		Input SW, MIC SW
	(Custom: $40)		Volume, mute, MIC gain
QB025	CXA1315M		Brightness, contrast, RGB gain
	(Custom: $44)		Sync information
QV057	M62320FP		Camera ON/OFF (for TLP511), focus, zoom reading
	(Custom: $71)		Fan switch open

Table 5-11-1 IC control for each kind of panel system

Part No.	Type name	Process
	SYG	Various kinds of screen display process (position, picture frame,
QX004		property)
	(TC160G54AF1137)
		Screen position control (Vertical position, horizontal position)
QX007	CXA3106	Screen position control (sampling phase, sampling frequency)
QX204	TFORC	Picture frame control (R)
QX404	(TC203E2651AF-01)	Picture frame control (G)
QX604		Picture frame control (B)
QX001	M62320FP	Panel mode control
	(Custom: $78)	A/D sample phase (R)
QX002	M62320FP	A/D sample phase (G)
	(Custom: $7A)	A/D sample phase (B)

5-6