|
|
| Archer C7 | AC1750 Wireless Dual Band Gigabit Router | |
|
|
| |||
|
|
|
|
| |
|
| Slow | A wireless device is connecting to the network by WPS |
| |
|
| Flash | function. This process will last in the first 2 minutes. |
| |
|
|
|
|
| |
| (WPS) | On | A wireless device has been successfully added to the |
| |
| network by WPS function. |
| |||
|
|
|
| ||
|
|
|
|
| |
|
| Quick | A wireless device failed to be added to the network by WPS |
| |
|
| Flash | function. |
| |
|
|
|
|
| |
| (USB on | Off | No storage device or printer is plugged into the USB port. |
| |
|
|
|
|
| |
| the rear panel) | On | A storage device or printer has connected to the USB port. |
| |
|
|
| |||
|
|
|
|
|
|
Table
Note:
1.After a device is successfully added to the network by WPS function, the WPS LED will keep on for about 5 minutes and then turn off.
2.The router is set to working concurrently in 2.4GHz and 5GHz by default. If you desire to choose the working frequency, please go to 4.5 Dual Band Selection.
1.4.2The Rear Panel
Figure 1-2 Rear Panel sketch
The following parts are located on the rear panel (View from left to right).
Power: The Power socket is where you will connect the power adapter. Please use the power adapter provided with this Archer C7 AC1750 Wireless Dual Band Gigabit Router.
On/Off: The switch for the power.
Wireless On/Off: The switch for the wireless function.
USB: The USB port connects to a USB storage device or a USB printer.
- 5 -
