TP-Link manual Archer C7, AC1750 Wireless Dual Band Gigabit Router

Archer C7

AC1750 Wireless Dual Band Gigabit Router

4.Select the protocol used for Incoming Ports from the Incoming Protocol drop-down list, either TCP or UDP, or All.

5.Select Enabled in Status field.

6.Click the Save button to save the new rule.

Figure 4-69 Add or Modify a Triggering Entry

Trigger Port - The port for outgoing traffic. An outgoing connection using this port will trigger this rule.

Trigger Protocol - The protocol used for Trigger Ports, either TCP, UDP, or All (all protocols supported by the router).

Incoming Port - The port or port range used by the remote system when it responds to the outgoing request. A response using one of these ports will be forwarded to the PC which triggered this rule. You can input at most 5 groups of ports (or port sections). Every group of ports must be separated with ",", for example, 2000-2038, 2046, 2050-2051, 2085, 3010-3030.

Incoming Protocol - The protocol used for Incoming Port, either TCP, UDP, or ALL (all protocols supported by the router).

Status - The status of this entry, Enabled means the Port Triggering entry is enabled.

Modify - To modify or delete an existing entry.

Common Applications - Some popular applications already listed in the drop-down list of Incoming Protocol.

To modify or delete an existing entry:

1.Find the desired entry in the table.

2.Click Modify or Delete as desired on the Modify column.

-77 -