TP-Link AC1750 manual II. Enter the client device’s PIN on the router

Archer C7 AC1750 Wireless Dual Band Gigabit Router

Figure 4-17

Figure 4-18 Add A New Device

Step 2: Press and hold the WPS button of the client device.

Step 3: The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup process.

Step 4: When the WPS LED is on, the client device has successfully connected to the router.

II. Enter the client device’s PIN on the router

Use this method if your client device does not have the WPS button, but has a Wi-Fi Protected Setup PIN number.

Step 1: Keep the default WPS status as Enabled and click the Add device button in Figure 4-16,then Figure 4-19will appear.

Figure 4-19 Add A New Device

Step 2: Enter the PIN number from the client device in the field on the WPS screen above. Then click Connect button.

Step 3: “Connect successfully” will appear on the screen of Figure 4-19,which means the client device has successfully connected to the router.

- 38 -