TP-Link manual Archer C7 AC1750 Wireless Dual Band Gigabit Router

Archer C7 AC1750 Wireless Dual Band Gigabit Router

Figure 4-35 Wireless Security

Disable Security - If you do not want to use wireless security, check this radio button. But it’s strongly recommended to choose one of the following modes to enable security.

WPA/WPA2-Personal - It’s the WPA/WPA2 authentication type based on pre-shared passphrase. The router is configured by this security type by default.

•Version - you can choose the version of the WPA-PSK security on the drop-down list. The default setting is Automatic, which can select WPA-PSK(Pre-shared key of WPA) or WPA2-PSK(Pre-shared key of WPA) automatically based on the wireless station's capability and request.

•Encryption - When WPA-PSKor WPA is set as the Authentication Type, you can select either Automatic, or TKIP or AES as Encryption.

Note:

If you check the WPA/WPA2-Personalradio button and choose TKIP encryption, you will find a notice in red as shown in Figure 4-36.

- 52 -