TP-Link manual Dhcp, DHCP Settings, Archer C7, AC1750 Wireless Dual Band Gigabit Router

Models: AC1750

1 146
Download 146 pages 25.44 Kb
Page 72
Image 72
4.9DHCP

Archer C7

AC1750 Wireless Dual Band Gigabit Router

4.9DHCP

Figure 4-47 The DHCP menu

There are three submenus under the DHCP menu (shown in Figure 4-47):DHCP Settings, DHCP Clients List and Address Reservation. Click any of them, and you will be able to configure the corresponding functions.

4.9.1DHCP Settings

Choose menu “DHCP DHCP Settings”, you can configure the DHCP Server on the page as shown in Figure 4-48.The router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are connected to the router on the LAN.

Figure 4-48 DHCP Settings

DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must have another DHCP server within your network or else you must configure the computer manually.

Start IP Address - Specify an IP address for the DHCP Server to start with when assigning IP addresses. 192.168.0.100 is the default start address.

End IP Address - Specify an IP address for the DHCP Server to end with when assigning IP addresses. 192.168.0.199 is the default end address.

- 62 -

Page 72
Image 72
TP-Link manual Dhcp, DHCP Settings, Archer C7, AC1750 Wireless Dual Band Gigabit Router