TP-Link manual Archer C7 AC1750 Wireless Dual Band Gigabit Router,  Note,  Wireless Security

Archer C7 AC1750 Wireless Dual Band Gigabit Router

Channel - This field determines which operating frequency will be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point. If you select “Auto”, then the AP will select the best channel automatically.

7.Configure the basic parameters for 5GHz wireless network in the following screen as shown in Figure 3-13,and then click Next.

Figure 3-13 Quick Setup – Wireless

Wireless Radio - Choose from the drop-down list to enable or disable the wireless radio.

Wireless Network Name - Also called the SSID (Service Set Identification). Enter a value of up to 32 characters. The same name must be assigned to all wireless devices in your network. The default SSID is set to be TP-LINK_5GHz_XXXXXX. This value is case-sensitive. For example, TEST is NOT the same as test.

Region - Select your region from the drop-down list. This field specifies the region where the wireless function of the router can be used. It may be illegal to use the wireless function of the router in a region other than one of those specified in this field. If your country or region is not listed, please contact your local government agency for assistance.

Note:

Limited by local law regulations, version for North America does not have region selection option.

Wireless Security

- 18 -