Trilogy Touch Technology 9 manual Options Available and Module Type Numbers

Commander Installation Guide

1.INTRODUCTION

This manual provides installation information for the Commander Digital Intercom system. Cabling and pin-out information is included for all of the Trilogy manufactured items plus some commonly used third party equipment. Other information relating to the hardware configuration will be useful if the system is upgraded or expanded in the future.

•Section 2 covers the matrix assembly and installation, to the point where the matrix may be powered

•Section 3 covers all of the cabling necessary to complete the installation.

•Section 4 provides information on connecting multiple matrices to form a network.

•Section 5 gives wiring details for the range of Trilogy control panels.

•Section 6 explains the Commander re-programming software, which may be used to update hardware.

•Section 7 provides information on installing other equipment (e.g. telephones, radio talkback).

•Section 8 provides information about hardware which is no longer supplied by Trilogy with new systems.

•Section 9 gives the system specification for matrix hardware, control panels and the configuration computer.

For further assistance please contact Trilogy Communications Technical Support Department at the address given at the front of this document. You may also contact us by e-mail at:

support@trilogycomms.com

1.1OPTIONS AVAILABLE AND MODULE TYPE NUMBERS

Please contact our Sales Department for a listing of the current module types.

Due to the nature of talkback systems, any given installation may have some custom items. Trilogy Communications prides itself on its ability to tailor standard components to meet specific requirements and is willing to discuss any other customisation as required.

Trilogy Communications Limited Issue 9 Page 7 of 81