Introduction | Trilogy Touch Technology 9 instruction

Commander Installation Guide

6.COMMANDER PROGRAMMING KIT

6.1INTRODUCTION

This utility allows software to be updated on certain hardware items from the Commander range. These are: -

•500-02-1x Talkback Controller

•500-01-10 TDM Controller

•500-08-10 Changeover Controller

•500-3x-3x Series control panels

•500-40-0x Series expansion control panels

•500-41-0x Desktop Control Panels

The program operates in conjunction with: -

•Archipel transputer link adaptor card fitted to a desktop PC

•Sundance SMT104 PCMCIA card fitted to a laptop PC

•Sundance SMT104 plus PCMCIA/ISA adaptor kit fitted to a desktop PC

•500-16-03 Download Converter

Note that the Programming Kit will only operate when a transputer download adaptor has been supplied. More recent systems use RS422 or RS232 download adaptors. These are not suitable for re-programming.

An alternate connection cable must be used – the supplied cable is manufactured with violet coloured wire. It is not interchangeable with the download lead, which is normally coloured grey. An additional adaptor is required for programming the 500-08-10 Changeover Controller. See 6.2.4.4 for further details.

If the matrix hardware is being reprogrammed, the Intercom system will not operate until the procedure is complete. If the Talkback Controller is to be reprogrammed, a Version upgrade (e.g. 4.15 to 4.16) will also erase the configuration flash RAM. This may not be the case with incremental upgrades (e.g. 4.15c to 4.15d), but it would be wise to ensure that the latest configurations are available on disk, ready for download.

6.2TTPROG SOFTWARE 6.2.1 SET-UP ROUTINE

The installation package may be provided on a single floppy disk or as a zip file. For the latter, expand the zip file to a suitable location (e.g. C:\Commprog). From this location, or from the floppy disk, run the program setup.exe.

Follow the on-screen instructions and all necessary files will be installed and an icon added to the computer Start menu.

Trilogy Communications Limited

Issue 9

Page 51 of 81

Image 51

Trilogy Touch Technology 9 manual Introduction, Ttprog Software 6.2.1 SET-UP Routine

Contents

Installation Guide Issue Date Reason for Change Approved Document Number50096601.doc Description Errata Sheet Contents Introduction Control Panels Legacy Hardware Options Available and Module Type Numbers Commander Installation Guide Issue Introduction UnpackingRack Mounting System Assembly 1 500-08 Series Changeover Card 500-08-10 Changeover Module Commander Installation Guide Commander Installation Guide 5 500-10 Series MISC. I/O GPI Cards 4 500-25-00 E1 Network Link Card 6 500-06 Series Matrix Cards XLR4 Fixed Socket Pin Function Mains Connection and Fusing1 500-15-30 Series Power Supply D9 Fixed Plug Pin Function Starting the System Commander Installation Guide Connecting the Matrix Ports Connecting the PC to the Commander SystemConnection VIA a PC COM Port Using RS232 Connection VIA a 500-16-03 Download Converter BOX Sub D 9 free female Sub D 9 free maleSub D 9 free female Installing Pathfinder 574 not 576 for a six frame system Camera Connector Other Matrix ConnectionsMatrix Ports RJ-45 Serial Link RS232 / RS422 RS232 configurationRS422 configuration Alarms Commander D37 Fixed Plug Pin Description Miscellaneous I/O Card Connector PIN-OUT Commander D25 Fixed Socket Upper Connector Pins Description Commander D25 Fixed Socket Lower Connector Pins DescriptionCommander D9 Fixed Socket Pin Description 5.1 500-10 Switches and Indicators Suggested external wiring of Misc I/O card output LED 5.3 500-25 Network Card Indicators and Switches Configuring the Gain of Camera Inputs .5.1 Link Setting on 1 500-26 Network Rear Connector Unit RCU Connecting Networked Systems Either Serial Networking Commander Installation Guide Issue Current Range Control Panel Facility Comparison Table 500-41-XX Series Desktop Panels Specification Matrix and Expansion RJ45 socket view from rear of panel 2 500-3X-5X Series Standard Control Panel Rear ViewExpansion Port RJ45 socket RJ-45 Function Pin View of Keypad front panel Gpio Local logic in and out D9 Fixed SocketAudio I/O D15 Fixed Socket Keypad D9 Fixed Socket -51 variant only OFF 4 500-3X-5X Series DIP Switch Settings Rear Connector Layout Rear Connecor Layout Connections Expansion out RJ-45 fixed socket on panelMatrix RJ-45 fixed socket on panel Gpio Local logic in and out D9 Fixed Socket Keypad D9 Fixed Socket View of Keypad as seen on front panelControl Panel Gpio External Circuitry Headset 5 Pin XLR Fixed Socket front panel Connector types500-31-60 Standard Facility 16 KEY Control Panel Rear Panel Layout Gpio Local logic in and out D9 Fixed Socket 10 500-33-00 / 500-45-00 / 500-46-00 Range Gpio Local logic in and out D9 Fixed Socket Commander Installation Guide Issue Ttprog Software 6.2.1 SET-UP Routine Starting the Programme Connecting the Hardware 4.2 500-02-1x Talkback Controller4.3 500-3x-3x Control Panels Commander Programming Cable Way D Male Way D Female 4.4 500-08-10 Changeover CardProgramming with the 500-16-03 Download Converter RM15TPD-12S Beltpacks Trilogy 500-19-10 Telephone Interface Frame Connector Detail per channelConnector Detail Telephone Interfaces Telos ONE Alignment 500-22-00 ICIS-1 Isdn Interface RT Equipment 1.5 RJ45 Isdn Interface RJ45 ConnectorCom Port Remote Ports D15 Fixed Plug on ICIS-2 DTE 500-23-00 ICIS-2 Isdn Interface Matrix Cards Gain Setting on Power Supplies Matrix DownloadComputer Operating Systems Important Note Installing AN Archipel Download Card in a P.C Commander Installation Guide Black BOX IC114A Pcmcia Serial Adaptor Card Matrix Ports D9 Legacy Control Panel Facility Comparison Table Legacy Control Panels 2.1 500-3x-3x Series Standard Control Panel Rear View Expansion Port- D9 Fixed Socket Test Port- D9 Fixed Socket 3 500-30 Series DIP Switch Settings Connector Pin Out Expansion In D9 Fixed Socket 4 500-40-0X Series Expansion PanelsExpansion Out- D9 Fixed Socket Commander Installation Guide Page Connecting VIA Structured Cabling Type B max length 10 metres D9 Free Plug Function PinD9 pin RJ 45 pin Colour see above 6 500-39-30 / 31 1U 12 KEY Panel with Loudspeaker 6.1 500-39-30 Connector Pin Out 6.2 500-39-30 Rear View 7 500-3X-5X Series Control Panels8 500-43-51 1U, 8 REN Level Control Panel Panels Matrix Audio Specification Using 500-06-02 Matrix CardsGeneral Real Time Performance P.C Miscellaneous I/O Card 10.1 500-3X-5X Series Internal Panel Switch Settings 10.2 500-41 Desktop Panel Internal SettingsCut Switch Action No action 10.3 500-31-60 Programming CUT Switch Operation HSMic LSCut MCCut OffTest Function Transportation and Storage Safety PrecautionsMains Connector and Plug Loop Back Test Mode