Commander Installation Guide | Trilogy Touch Technology 9 specs

Commander Installation Guide

If this phase is successful and the TDM controller is running correctly, switch off the system. Turn the flash bank selector switch to an active bank (i.e 1,2,3 or 4) and re-start the system. The yellow polling LED on the 500-02 Talkback Controller will start to flash, indicating that a configuration has been loaded from the Flash RAM and is active on the system.

Finally, the standby Talkback and TDM controllers may be added. Switch the system off, carefully add the cards in the positions shown in section 2.4.6 then re-power the system. The main TDM controller (on the left side of the frame) should now initialise and display an LED pattern as on the previous page. The Standby TDM controller (on the right side of the frame) should display the “standby” pattern which is LED 1-8 alternating with LED 9-16.

Page 18 of 81

Issue 9

Trilogy Communications Limited

Image 18

Trilogy Touch Technology 9 manual Commander Installation Guide

Contents

Installation Guide Issue Date Reason for Change Approved Document Number50096601.doc Errata Sheet Description Contents Introduction Control Panels Legacy Hardware Options Available and Module Type Numbers Commander Installation Guide Issue Introduction UnpackingRack Mounting System Assembly 500-08-10 Changeover Module 1 500-08 Series Changeover Card Commander Installation Guide Commander Installation Guide 4 500-25-00 E1 Network Link Card 5 500-10 Series MISC. I/O GPI Cards 6 500-06 Series Matrix Cards D9 Fixed Plug Pin Function Mains Connection and Fusing1 500-15-30 Series Power Supply XLR4 Fixed Socket Pin Function Starting the System Commander Installation Guide Connecting the Matrix Ports Connecting the PC to the Commander SystemConnection VIA a PC COM Port Using RS232 Connection VIA a 500-16-03 Download Converter BOX Sub D 9 free female Sub D 9 free maleSub D 9 free female Installing Pathfinder 574 not 576 for a six frame system Camera Connector Other Matrix ConnectionsMatrix Ports RJ-45 Alarms RS232 configurationRS422 configuration Serial Link RS232 / RS422 Miscellaneous I/O Card Connector PIN-OUT Commander D37 Fixed Plug Pin Description Commander D25 Fixed Socket Upper Connector Pins Description Commander D25 Fixed Socket Lower Connector Pins DescriptionCommander D9 Fixed Socket Pin Description 5.1 500-10 Switches and Indicators Suggested external wiring of Misc I/O card output 5.3 500-25 Network Card Indicators and Switches LED Configuring the Gain of Camera Inputs .5.1 Link Setting on Connecting Networked Systems 1 500-26 Network Rear Connector Unit RCU Either Serial Networking Commander Installation Guide Issue Current Range Control Panel Facility Comparison Table 500-41-XX Series Desktop Panels Specification RJ-45 Function Pin 2 500-3X-5X Series Standard Control Panel Rear ViewExpansion Port RJ45 socket Matrix and Expansion RJ45 socket view from rear of panel Keypad D9 Fixed Socket -51 variant only Gpio Local logic in and out D9 Fixed SocketAudio I/O D15 Fixed Socket View of Keypad front panel 4 500-3X-5X Series DIP Switch Settings OFF Rear Connector Layout Rear Connecor Layout Connections Expansion out RJ-45 fixed socket on panelMatrix RJ-45 fixed socket on panel Gpio Local logic in and out D9 Fixed Socket Keypad D9 Fixed Socket View of Keypad as seen on front panelControl Panel Gpio External Circuitry Rear Panel Layout Connector types500-31-60 Standard Facility 16 KEY Control Panel Headset 5 Pin XLR Fixed Socket front panel Gpio Local logic in and out D9 Fixed Socket 10 500-33-00 / 500-45-00 / 500-46-00 Range Gpio Local logic in and out D9 Fixed Socket Commander Installation Guide Issue Ttprog Software 6.2.1 SET-UP Routine Starting the Programme Connecting the Hardware 4.2 500-02-1x Talkback Controller4.3 500-3x-3x Control Panels Commander Programming Cable Way D Male Way D Female 4.4 500-08-10 Changeover CardProgramming with the 500-16-03 Download Converter Beltpacks RM15TPD-12S Telephone Interfaces Connector Detail per channelConnector Detail Trilogy 500-19-10 Telephone Interface Frame Telos ONE Alignment RT Equipment 500-22-00 ICIS-1 Isdn Interface Remote Ports Isdn Interface RJ45 ConnectorCom Port 1.5 RJ45 500-23-00 ICIS-2 Isdn Interface D15 Fixed Plug on ICIS-2 DTE Gain Setting on Matrix Cards Power Supplies Matrix DownloadComputer Operating Systems Important Note Installing AN Archipel Download Card in a P.C Commander Installation Guide Black BOX IC114A Pcmcia Serial Adaptor Card Matrix Ports D9 Legacy Control Panels Legacy Control Panel Facility Comparison Table 2.1 500-3x-3x Series Standard Control Panel Rear View Test Port- D9 Fixed Socket Expansion Port- D9 Fixed Socket 3 500-30 Series DIP Switch Settings Connector Pin Out Expansion In D9 Fixed Socket 4 500-40-0X Series Expansion PanelsExpansion Out- D9 Fixed Socket Commander Installation Guide Page Connecting VIA Structured Cabling Type B max length 10 metres D9 Free Plug Function PinD9 pin RJ 45 pin Colour see above 6.1 500-39-30 Connector Pin Out 6 500-39-30 / 31 1U 12 KEY Panel with Loudspeaker 6.2 500-39-30 Rear View 7 500-3X-5X Series Control Panels8 500-43-51 1U, 8 REN Level Control Panel Real Time Performance Matrix Audio Specification Using 500-06-02 Matrix CardsGeneral Panels Miscellaneous I/O Card P.C 10.1 500-3X-5X Series Internal Panel Switch Settings 10.2 500-41 Desktop Panel Internal SettingsCut Switch Action No action 10.3 500-31-60 Programming CUT Switch Operation HSMic LSCut MCCut OffTest Function Loop Back Test Mode Safety PrecautionsMains Connector and Plug Transportation and Storage