Tut Systems XL-12000S manual Upgrade Software, From the Main Menu select D

XL-12000S

MANAGED, HIGH-SPEED NETWORK MODEM USER GUIDE

1.From the Main Menu select “D”.

Note: Only one DHCP server address is supported for the DSL interface and one for the LAN interface. To broadcast to more than one DHCP server, leave the default (0.0.0.0) in place.

Table 8.2 Specific field information for the DHCP Relay Agent screen.

FIELD	DESCRIPTION
Enable DHCP Relay Agent	Enables “Y” or disables “N” this feature. This feature has
(Y/N)	no meaning for a modem in bridged mode.
SDSL Interface:	IP address of the server. The IP Address located off the
	DSL port entered here specifies the server to and/or from
	which the modem will forward packets.
	Note: The Broadcast IP Address is “0.0.0.0”. To remove
	an IP address from the DSL or LAN Interface list, simply
	change it to “0.0.0.0”.
LAN Interface:	IP address of the server located off the LAN port. The
	IP Address entered here specifies the server to and/
	or from which the modem will forward packets.
	Note: The Broadcast IP Address is “0.0.0.0”. To remove
	an IP address from the DSL or LAN Interface list, simply
	change it to “0.0.0.0”.

8.3Upgrade Software

Occasionally Tut Systems will provide upgrades to the XL-12000S software. Check the Software Download Center of Tut Systems’ web site (www.tutsys.com) for release information. Information will be provided on how to obtain the DOS utility program.

This section describes how to upgrade the software in the XL-12000S modem. From the main menu select “U” for the Upgrade Software screen. The Upgrade Software screen on the XL-12000S displays version information for up to two images. If one or the other image is not valid or has never been loaded, the field will be blank. The display also indicates which image is currently running, and which image will be run when the modem boots. Two input fields allow you to change which image to boot from at the next reboot of the modem, and to enable or disable receiving a new image onto the modem.

44 TUT SYSTEMS 8.0 ADVANCED MODEM FEATURES

Back to Table of Contents