XL-12000S

MANAGED, HIGH-SPEED NETWORK MODEM USER GUIDE

The static routing table fields in the Modem 1 Configuration would be:

Destination

Mask

Gateway

Hops

192.168.4.0

255.255.255.0

192.168.3.2

1

For Modem 2:

The “LAN IP address” field in the Modem Configuration screen will be set to 192.168.4.1

The LAN “Subnet Mask” field in the Modem Configuration screen will be set to 255.255.255.0

The “DSL IP address” field in the Modem Configuration screen will be set to 192.168.3.2

The DSL “Subnet Mask” field in the Modem Configuration screen will be set to 255.255.255.0

The “Master/Slave” field in the Modem Configuration screen will be set to Slave.

The “Routing/Bridging” field in the Modem Configuration screen will be set to ip_routing_only

The static routing table fields in the Modem 2 Configuration would be:

Destination

Mask

Gateway

Hops

192.168.2.0

255.255.255.0

192.168.3.1

1

3. Bridge Non-IP

This selection will enable the modem to route IP traffic and bridge non-IP traffic at the same time. The modem passes only IP packets between networks attached to the LAN and DSL sides of the modem and networks designated in the modems static routing tables.

Bridge non-IP example: This example shows how the XL-12000S routes IP packets. However, the Macintosh can still use the Apple printer located in another building because non-IP packets (AppleTalk) are bridged across the DSL line.

7.0 CONFIGURE THE MODEM

TUT SYSTEMS 23

Page 31
Image 31
Tut Systems XL-12000S manual For Modem, Bridge Non-IP