XL-12000S
MANAGED,HIGH-SPEED NETWORK MODEM USER GUIDE
46 TUT SYSTEMS 8.0 ADVANCED MODEM FEATURES
Figure 8.3 Upgrade Software Screen
Table 8.3 Specific field information for the Upgrade Software screen.
FIELD DESCRIPTION
Running,Boot = > Displays the currently running image (either 1 or 2).
Image 1: Displays the software release number of Image #1.
Image 2: Displays the software release number of Image #2 or if
empty,it will be blank.
Choose image to Boot (1/2): Choose Image 1 or Image 2. Select the image that will be
used on the next boot of the modem.
Enable Transfer to Image 2: Enables image transferring. Select “Y”to enable and “N”
to disable.
Detailed Steps for Running Tutxlutil
Tutxlutil is the program used to send a new image to an XL-12000S.
Software upgrades are available from Tut Systems. Tutxlutil must
be run on a PC that has network connectivity to the modem. The
modem will accept an image from either the 10Base-T port or the
DSL port, so both local and remote modems may be upgraded. If the
PC is not on the same subnet as the XL-12000S, the Default
Gateway field on the XL-12000S may need to be set to an
appropriate router.
Back to Table of Contents