Tut Systems XL-12000S manual No host named target was found

XL-12000S

MANAGED, HIGH-SPEED NETWORK MODEM USER GUIDE

10. I’m getting an error message when using tutxlutil. target: Host not found.

No host named target was found.

target: Connection refused. The target is not an XL-12000S.

The target host exists, but does not appear to be an XL-12000S. May also happen with an XL-12000S if image transfer is not enabled.

target: Connection timed out.

Target is not responding to the network.

Connection to target closed unexpectedly.

The image was not completely sent.

Password incorrect.

The username/password supplied are not valid on the target.

File does not appear to be an XL-12000S upgrade file.

The file you are using to upgrade the modem is either the wrong file or a corrupt file.

Upgrade file is empty or too big.

The file specified with /f does not appear to be an

XL-12000S upgrade file.

Upgrade file is corrupted.

The file appears to be an XL-12000S upgrade file, but is damaged.

Filename: reason.

The upgrade file cannot be found, or is not accessible, or other file system error.

56 TUT SYSTEMS 10.0 TROUBLESHOOTING

Back to Table of Contents