Set-up (continued)
Caution when loading the retransfer film
cassette and/or the ink ribbon cassette
The following caution shall be kept when the retransfer
film cassette and/or the ink ribbon cassette is removed
because of card jam or other trouble.
Please pay enough attention so that the retransfer film and/or ink ribbon is maintained at the right position. Particulary, the ink ribbon is extremely thin, therefore it apt to slip down when the cassette is removed as
shown in the illustration.
Improper Winding
Setting cards
Please use cards specified by your dealer. This unit can take both 0.76
CAUTION
Fingerprints, soiling, etc. on card surface can result in print errors. Wear
Inserting cards
Adjust the position with hands so that the media position of
When loaded in this condition, it may cause improper printing such as INK RUNOUT error, improper color printing etc.
To avoid this, please handle the ink ribbon and/or the retransfer film very carefully with hands so that the media position of
Please do not touch the print side of the ink ribbon and/ or the retransfer film with your hands. Otherwise, it may cause improper printing.
When adjusting the print position of the retransfer film and/or ink ribbon, please follow the instruction label attached on the cassettes.
The unit can take about 300
As for 0.25mm thick cards do not insert more than 300 pcs.
This 300 pcs. is not a guaranteed quantity.
In the event of card feed failure, caused by card bending or others reduce card quantity.
CAUTION
When removing new cards from the box, it is possible that cards may be stuck due to static electricity. In this case, peel the cards off one at a time before setting into position. Hold the edges of the card when carrying out these operations.
1. Open the card tray.
Hold the lower part of the card tray and pull the tray toward you slowly until it no longer moves.
19
