Operation (continued)
Clearing the free counter
Reset the free counter.
The [Total] counter and [Head] counter cannot be reset.
> C o u n t e r R e s e t | EXIT | Exit user |
O K ? |
| mode. |
| ||
|
|
|
ENTER
Cleaning mode
The printer is provided with an operation mode for cleaning the card feed roller and the magnetic head to keep the printer in the best condition.
See p.38,39 and p.40 for executing the cleaning mode.
> C l e a n i n g >
Press 
to reset.
(The electronic beep sounds .The beep will not sound if the buzzer mode setting
is set to off.)
To check that the counter is reset to zero, select “Free Counter” in “Setting the counter type” on p.29.
ENTER
> > R o l l e r s | ENTER |
O K ?
ENTER
Select the cleaning item with
and press
Execution
(The electronic beep sounds. The beep will not sound if the buzzer mode setting is set to off.)
for execution.
CAUTION
The head counter is cleared to zero
each time the thermal head is replaced.
> > MG H e a d | ENTER |
|
|
O K ?
(The electronic beep sounds . The beep will not sound if the buzzer mode setting is set to off.)
To exit the cleaning mode, turn off the power after cleaning.
30
