Before use | (continued) |
Storing and handling cards after printing
Avoid storing the cards in locations exposed to direct sunlight or with high temperature and high humidity. Furthermore, avoid contact with the following chemicals and stationery, as they can cause discoloration or fading of the cards:
•Organic solvents such as alcohol, film cleaner, diazo copies, etc.
•Soft vinyl chlorides, document cases, pass holders, erasers, etc.
•
Purchasing print media and cards
Contact your dealer regarding the purchase of print media (retransfer film and ink ribbons) and cards. Always use the products specified below.
Print media
Use only the ink ribbons and retransfer film specified for this unit. For the names of these products refer to “Main Specifications” on p. 47 of this manual.
CAUTION
| We can accept no liability for any | |
problems arising as a result of the use of media using | ||
materials other than those specified. |
| |
Card material |
|
|
ISO/IEC 7810 | type ID1 (dimensions) : |
|
|
| equivalent product |
ISO/IEC |
| |
|
| equivalent product |
ISO/IEC 7816 | (IC card) : | equivalent product |
The materials of some cards may not be suitable for printing. Consult your dealer regarding the materials to be used and specifications required before purchase.
Escape Clause
We do not provide compensation for any malfunction during card printing caused by breakdown of the machine, ink ribbon defects or card characteristics. In addition, we also do not provide compensation for insufficient print quality, which are not agreed in advance. Please evaluate carefully beforehand.
Card Material
Some card material may not be suitable for printing. Using a
No compensation is made for the life reduction and failures that were caused by unsuitable card material. Warp of card or uneven thickness of IC cards, even though they are within the tolerance of JIS or ISO standards, may not be suitable for printing or feeding. For details on the specifications about card material or others, consult the dealer in advance
Version upgrade
The following defects may occur as a result of the ver sion upgrade for the firmware of the printer or for the printer driver.
•Card printing is disabled for the appliation software that has been used.
•The operation of the printer or application software becomes unstable.
•Defects in print result occurs.
•Print color or shade differs.
•The performance of reproducing fine letters, changes.
•Others
Be sure to retain a copy of the current version when performing version upgrade. Reinstall the previous ver sion immediately if these problems occur. We are not liable for any damage such as defective cards or inter ruptions during printing as a result of the version up grade.
8
