Before use | (continued) |
|
|
| Installation |
|
|
The performance of the card printer is strongly influenced by the installation location.Be careful of the following items as for installation location.
•Install in the locations is not so much as to cause print defect due to dust adherence.
Dusty environment increases print defect. It is recommended that the card printer is used in the locations with the cleanness Class 8 or better of
(1)Carpeted room
(2)Crowded locations
(3)Locations where paper(corrugated etc.) is handled
(4)Areas near copy machines
When the card printer is not used, it is recommended that the power is turned off and the printer is covered by plastic sheet etc.(not textile).
•Install in the locations where the printer performance is kept.
Aviod the locations below where the performance or life of the printer is affected.
(1)Locations where there is vibrations or shock
(2)Locations exposed to direct sunshine.
(3)Wet locations without ventilation
(4)Unstable locations and sloped surface
(5)Areas near air conditioners, humidifiers, stoves, etc. that may cause condensation within the printer .
•Install in the environment that gives full play to the printer ability.
The printer is to be installed in an environment |
| |||
with the following temperature and humidity. |
| |||
Temperature | : | 15 | ° C to 30 | ° C |
|
|
| 59° F to 86 | ° F |
Humidity | : |
| 35% to 70% |
|
CAUTION
Use of the printer in an environment with temperatures lower than the above range may cause retransfer errors and use of the printer in an environment
with temperatures higher than the above range may cause print errors from deformation of the cards and wrinkling of the film.
Installation diagram
Ventilation holes are provided for the cooling fan on the bottom and sides of the unit. Avoid inserting any object into the gap between the bottom of the unit and the top of the stand. Install the unit with its sides at least 20cm away from the surrounding wall as illustrated in the diagram, and keep the back of the unit at least 10cm away from the wall. Also, do not place any object on top of the unit.
| Do not place objects on top |
20cm or more | 20cm or more |
7.9 inches or more | 7.9 inches or more |
9
